John Deere M900/M900i series sprayers

Treated herbicide machines John Deere M900/M900i It combines high-capacity tanks with options for spraying control. The range includes the M944(i), M952(i) and M962(i) models, with nominal volumes of 4,400, 5,200 and 6,200 liters, and chutes from 24 to 40 m, depending on the configuration.

Choose the M900 or M900i variant with ISOBUS in relation to the available tractor and the functions necessary for your work. The IPSO team can support you in choosing the tank, the hose and the equipment for adjusting the volume of solution applied per hectare.

John Deere M900/M900i series sprayers available through IPSO

Capacity and control for farm treatments

A larger tank can extend the interval between feedings, but the choice of equipment must be correlated with the tractor, the soil conditions, and the organization of the plots. Together, analyze the volume of solution required, the width of the chute, and the time available for carrying out treatments.

AutoFill or AutoDilute on John Deere M900/M900i series sprayers available through IPSO

Affordable orders for feeding and rinsing

Manual valve settings allow for the management of routine operations. Depending on the configuration, the AutoFill and AutoDilute options add functions for filling control and for diluting and rinsing the residual solution.

The selection of the doves with TwinSelect

TwinSelect allows switching between two nozzles from the cabin, in compatible configurations. The function simplifies the adjustment of the spray to the requirements of the job. The choice of nozzles and pressure is made based on the product, the volume of application, and the size of the droplets required for the treatment.

TwinSelect on John Deere M900/M900i series sprayers available through IPSO
John Deere M900/M900i series John Deere M900/M900i series sprayer nozzle spacers available through IPSO

Thorns at 25 cm for working with the lowered ramp

In the 25 cm nozzle configuration, the smaller distance allows the use of a reduced height of the boom, with the nozzles and corresponding spray angles. The working height is determined according to the manufacturer’s recommendations for the nozzles to maintain the correct overlap of the jets and the uniformity of the coverage.

Power supply through a closed transfer system

With compatible equipment, the direct transfer from the container reduces the open handling of the products and the operator’s contact with them. Check with IPSO the compatibility of the installation, adapters and containers used on the farm.
Closed transfer system connection to John Deere M900/M900i series sprayers available through IPSO
TerrainControl™ Pro and TerrainCommand™ Pro on John Deere M900/M900i Series sprayers available through IPSO

Control the position of the ramp

The TerrainControl™ Pro and TerrainCommand™ Pro systems adjust the pitch of the blade based on sensor information, depending on the equipment. Maintaining working distance from the ground or crop helps to even out treatments and reduces the need for manual adjustments.

Individual control the rules for limiting overlaps

In compatible configurations, the individual command allows stopping the sprinklers above already treated areas. The function is useful on irregular contours and at the ends of plots, where paths intersect.
Individual Nozzle Control on John Deere R900i series sprayers available through IPSO

John Deere M900/M900i trailed sprayers available via IPSO

How do you choose between the John Deere M944(i), M952(i) and M962(i)?

It starts from the required volume of solution between the feeds and checks the compatibility of the assembled system with the tractor and the terrain. The width of the chute and the level of automation are set separately for the offered configuration.

Criteria John Deere M944(i) John Deere M952(i) John Deere M962(i)
Nominal tank capacity 4,400 l 5,200 l 6,200 l
Widths of ramps in the range* 24–40 m 24–40 m 24–40 m
Total pump capacity* 2 × 280 l/min 2 × 280 l/min 2 × 280 l/min
When it is worth analyzing When 4,400 l cover the need between the planned supplies. When you need additional autonomy compared to the 4,400 l version. When you're looking for the highest tank capacity in the range.

Scroll horizontally to see all the columns.

* The ramp widths and available features are confirmed in the offer. The value of 560 l/min represents the total indicated capacity of the two pumps, not the available flow at the ramp.

At the same application volume per hectare, the 6,200 l tank offers a theoretical range approximately 41% greater than the 4,400 l tank. The daily capacity also depends on the width of the boom, the appropriate speed of treatment, and the time spent feeding and moving.

Dosage adjustment with Individual Nozzle Control Pro

In compatible configurations, Individual Nozzle Control Pro uses pulse width modulation to adjust the flow rate of each nozzle. The system adapts the spraying to speed variations and allows compensation in curves within the operating range of the equipment.

John Deere M700/M700i Series John Deere M700/M700i Series Spray Nozzle Controls available through IPSO

Droplet control at speed variations

Flow control by pulses allows the adjustment of the sprayed volume without exclusively using pressure modification. Thus, the system supports maintaining the application volume and droplet size within the operating range of the selected nozzles.

Adjusting the flow during movement

When the tractor accelerates or decelerates, the system modifies the opening time of the valves to maintain the set application volume. This function is useful on terrain with slopes or irregular contours, where maintaining a constant speed can be difficult.

Speed-independent application rate John Deere M700/M700i series sprayers available through IPSO

At lower speeds, the system reduces the opening time of the nozzles to adapt the flow to the surface being covered.

Speed-independent application rate John Deere M700/M700i series sprayers available through IPSO

With the increase in speed, the system increases the opening time of the nozzles to maintain the set application volume.

Compensation of the flow in curves

In the curve, the nozzles on the outside of the ramp move faster than those on the inside. The system adjusts the individual flow to limit under-dosing on the outside and over-dosing inside the curve.

Uniform rate of application - John Deere M700/M700i series sprayers available through IPSO

Without compensation, the speed differences between the ends of the row can produce variations in the volume applied per hectare.

Uniform rate of application - John Deere M700/M700i series sprayers available through IPSO

The compensation adjusts the flow of the nozzles to the local speed of travel, for a more uniform distribution in the curve.

Selection of the herds and uniformity of treatments

Choose the nozzles based on the treatment, the volume of solution per hectare, the working speed and the recommended pressure. Check the flow rate and the jet shape before application: worn nozzles, clogged filters and variations in the ram position can affect the distribution even if the total applied volume seems correct.

The pump flow rate, expressed in l/min, differs from the volume applied per hectare, expressed in l/ha. The required flow for spraying depends on the width of the row, the travel speed and the volume of application, and the installation must also provide for the functions of stirring and circulating the solution.

Întrebări frecvente despre John Deere M900/M900i trailed sprayers

What is the difference between the M900 and the M900i?

The M900i variants are equipped with ISOBUS. The control system and additional functions are checked for the model offered, along with the monitor, activations, and compatibility of the tractor.

The nominal capacities are 4,400, 5,200 and 6,200 l. The choice depends on the area to be treated between the inputs, the volume of solution per hectare and compatibility with the tractor and the terrain conditions.

It is the total indicated capacity of two pumps of 280 l/min each. It does not represent the available full flow for spraying at the ramp. The flow distribution depends on the circuit and the functions used.

The nozzle type correlates with the treatment, the volume applied per hectare, the working speed and the pressure. Follow the product instructions and the manufacturer's recommendations for the nozzles.

Compatibility is determined for the exact configuration and the weight of the loaded machine. In addition to power, the coupling system, braking, hydraulic requirements, and electrical and ISOBUS connections are also checked.

The availability of this function is confirmed in the machinery’s specifications. The models and configurations may have different spraying control and command systems.