Kuhn

Showing 1–24 of 47 results

KUHN TF 1512 & 2300 C front-mounted front-mounted harrow

The TF 1512 and TF 2300 C front-mounted fertiliser spreaders are designed for high autonomy, optimum weight balance and accurate metering, and are compatible with a variety of seeding and tillage implements.

Find out more
KUHN PROLANDER Combiner with „S” vibrating "S" vibrating beam
- Working widths: 4 / 5 / 6 m
- Power required: 100-210 hp
- Active organs: 70×12 mm, 4 rows, 15 cm pitch
- Working depth: 3 - 12 cm
- Depth adjustment: mechanical (with spacer)
- Weight: 1710 - 2260 kg
- Transport: 2.5m wide, ideal for small tractors
- Working widths: 6 / 7.5 / 7.5 / 9 / 12 / 12 / 14 m
- Power required: 150 - 600 hp
- Active organs: 70×12 mm or 90×13 mm, 5 rows
- Working depth: 3 - 12 cm
- Depth adjustment: hydraulic continuous
- Weight: up to 13,000 kg
- Transport: max width 3 m, max height 4 m
- Headland Lift Control (HLC) technology on 12 and 14 m models
Find out more
Conditioning mowers KUHN FC 244-284-314
- The KUHN FC 244-284-314 FC 244-284-314 range of conditioner mowers offers you efficient solutions for mowing forage with working widths between 2.40 m and 3.10 m.
- All models are equipped with the exclusive LIFT-CONTROL system, which ensures optimum ground adaptation and reduces impurities in the feed for a cleaner, more consistent result.
Find out more
KUHN FC 3115 D/R and FC 3515 D/R Conditioning Mowers
- LIFT-CONTROL suspension with hydraulic memory for optimal adaptation to the terrain.
- 100 series cutting bar with Protectadrive system for impact protection.
- Conditioner with swivelling steel fingers (model D) or polyurethane rollers (model R) for fast and even drying.
- End-of-row lifting system with integrated cylinder for increased manoeuvrability.
- Oval discs for efficient feed discharge.
- Compact design and good transport visibility.
Find out more
KUHN GMD 2721F - 3121F KUHN GMD 2721F - 3121F front-mounted stitchers
- Working widths: 2.72 m and 3.12 m
- Compact and robust construction, ideal for mountain areas
- OPTIDISC Elite cutterbar with large overlap areas and efficient feed discharge
- 16° pendulum joint for adaptation to the terrain
- FAST-FIT knife clamping system and mobile tool box
- FlexProtect side guards for extra safety
- No oil change needed
- Converging discs and spirals for efficient feed transfer on slopes
- Low weight and low centre of gravity for small or special tractors
- Optional equipment: hydraulic folding of guards, raised skids, side mirrors, drive shaft with clutch
Find out more
KUHN GMD 280F - 310F KUHN GMD 280F - 310F front-mounted mowers
- Working widths: 2.80 m and 3.11 m
- Good visibility during work and transport
- Excellent adaptation to soil contours
- Compact low-projection unit
- Suspension with side springs and hydraulic cylinders with shock absorber
- Efficient furrow delivery between the tractor wheels
- S100 cutterbar with large diameter gears, oval discs and Protectadrive system
- Quick installation of FAST-FIT knives
- Low maintenance and easy access to lubrication points
- Modern design with folding side guards and integrated signalling
Find out more
KUHN GMD GMD Series 10
- 100 series cutting bar, proven durability and superior cutting quality
- Oval discs for clean cutting and efficient feed discharge
- Spring suspension and flexible articulation for efficient tracking of the ground contour
- Furrow forming wheel, which ensures improved feed flow and even furrow formation
- Reinforced frame and robust structure, adapted to modern tractors and tough conditions
- PROTECTADRIVE for safety in the event of impact with obstacles
- Hydraulic folding for convenience and time-saving transport
Find out more
KUHN GMD GMD Series 100 and 105 Series mowers
- Superior cutting quality thanks to Series 100 cutting bar
- Effective protection and durability in harsh conditions
- Optimum furrow formation and grassland conservation
- Greater comfort in use and minimal maintenance
- Adaptability to different types of terrain and tractors
- Vertical storage possibility (GMD 105)
Find out more
KUHN GMD Series 1011 KUHN GMD Series 1011
- LIFT-CONTROL suspension for adaptability and comfort
- OPTIDISC Elite cutting bar for excellent cut quality
- Protectadrive safety system for component protection
- Easy maintenance and quick access to knives (Fast-Fit system)
- Centre joint for ground contour following
- Always safe when encountering obstacles
- Efficient furrow shaping with adjustable discs and wheels
- Reinforced frame and easy coupling, including 19 cm side clearance
- Modern design with knife storage
- Safe transport with automatic locking and good visibility
- Low maintenance costs thanks to durable components
Find out more
KUHN OPTIMER L 100 and L 1000 independent disc cultivators
- Ø 510 mm discs:
  - With small teeth: for work between 3-6 cm
  - With large teeth: for work between 5-10 cm
- High rotation speed for smooth and efficient mixing
- Compact frame for excellent manoeuvrability and light weight
- Working widths: from 3 m to 12.5 m
Find out more
KUHN OPTIMER XL independent disc cultivators
- Ø 620 mm large-toothed discs for cutting and mixing up to 15 cm
- Sturdy frame: mounted, foldaway or towed
- High working speed and simple adjustments
- SMART SOIL TECHNOLOGY (SST) and ISOBUS compatibility for convenience and accuracy
Find out more
KUHN CULTIMER L 100 and L 1000 Cultivators for weeding and tillage
- Curved ploughs with spiral deflectors for homogeneous mixing of soil and plant debris
- Working depth: 3-35 cm
- Even distribution of residues over the entire working width
- Levelling discs or levelling knives (for L 100) for efficient levelling
- Tillage rollers available: light, medium and heavy. They retain moisture and optimise soil-seed contact
Find out more
KUHN HIGHLANDER Tine cultivator for weeding and shallow loosening
Technical features:
- Working depth: 3-20 cm (continuously hydraulically adjustable)
- Double U Ø 550 mm or triple harrow with hydraulic adjustment
- 4 rows of teeth with non-stop mechanical safety (350 kg)
- 29 / 37 teeth (depending on model)
- Sun protection: 70 cm
- Distance between teeth: 20.7 cm
- Transport wheels: 560/45R22.5 or 620/45R22.5
- Transport width: 3 m
- Hydraulic/pneumatic suspension and braking for road transport
Find out more
KUHN PERFORMER 1000 versatile single pass cultivator
- Full pass (discs + plough + ploughing + tamping):
Cut, mix and tamp in one pass

Depth: 6-35 cm

Save time, fuel and resources
- 50 mm slack with a 50 mm bevel:
Deep restructuring with minimal disruption

Maintains bearing capacity and fertility
- Shallow thing with wings:
Surface cultivation with preservation of organic matter

Effective weed control
- With only the disc (no discs):
Maximum versatility, similar to CULTIMER

Depth: 5-35 cm
Find out more
Pneumatic fertiliser spreader Kuhn Aero GT
- 6 dosage units maximum flow 250 kg/min
- 30 speakers spread over 6 sections
- Stainless steel bar with vertical and horizontal suspension
- Distance Control System for automatic bar height adjustment
- Hydro-pneumatic suspension for stability on the ground and on the road
- Wide opening tank with hydraulic lid
- Customisable tyres and wheel track (2.25 m / 2.70 m)
Find out more
Pneumatic fertiliser spreader Kuhn AXENT 90.1 / 100.1
- Hopper capacity: 9.400 l
- Maximum flowup to 500 kg/min
- Feeding Conveior: 800 mm wide rubber, reliable and easy to maintain
- Suspension: mechanical (AXENT 90.1) or hydraulic (AXENT 100.1)
- Directional axes (AXENT 100.1): superior manoeuvrability and crop protection
- Modularity: AXIS PowerPack for granular fertilisers and LIME PowerPack for amendments
Find out more
Fertiliser Distributor Kuhn AXIS

Axis is the ideal solution for precise, efficient fertilisation tailored to modern precision farming requirements.

With a wide range of models, working widths up to 50 metres and advanced technologies such as EMC and VARISPREAD, AXIS ensures even distribution and significant input savings.

Find out more
KUHN rotary tillers for vineyards, orchards and special crops
- One-piece reinforced frame for high shock and wear resistance
- Lateral transmission with oil-immersed gears
- 540 rpm centre gearbox (EL 92: DUPLEX 2-4 speed gearbox)
- Large rotor with tapered bearings and superior sealing
- C-blades (standard): 6 per flange, helical shape for efficient mixing and shredding
- Blades (optional) for shallow work
Find out more
Rotary harrows for seedbed preparation KUHN HR
- HR 1020 / 1030 / 1040 (rigid)
- Working widths: 3.00-4.50 m
- Tractor power: up to 320 hp
- Gearbox: duplex, 255-539 rpm
- Blades: FAST-FIT, length up to 335 mm
- Adjustments: hydraulic depth and levelling bar
- Use: individually or with drills
Find out more
Rotary harrows for seedbed preparation KUHN HRB
- Seedbed preparation in viticulture, fruit, vegetable and field crops
- Suitable for tractors between 25-250 hp
- Can be used individually or with integrated drills
Find out more
KUHN GA twin rotor rakes
- The MASTER DRIVE GIII transmission offers a robust, double reduction gearbox, ideal for intensive tillage and dense crops.
- The hyper-tangential tine arms form uniform, aerated furrows that are easy to pick up by the baler.
- The 3D suspension and multiple wheels on the rotor perfectly follow the contours of the ground and minimise forage contamination.
- The system allows for one or two furrows, with hydraulic and electric adjustments, adapting to different types of soil and crops.
- Semi-mounted and trailed models are available in working widths from 3.00 m to 9.30 m, suitable for all farm needs.
Find out more
KUHN GA single rotor side delivery rakes
- Double, curved tine arms, positioned hyper-tangentially to form aerated, uniform and clean furrows
- MASTER DRIVE GIII gearbox with two-step reduction, suitable for heavy-duty work and dense crops
- Intelligent furrow former with parallelogram-mounted curtain, manually or hydraulically adjustable
- Wheels close to the rotor for accurate ground contour following and minimised contamination
- Mounted and trailed models with tandem axles and side shock absorbers for stability on slopes
- Improved ergonomics with simple height adjustment, easy folding of the protective covers and detachable arms for compact transport.
Find out more
KUHN GF Series 1002 and Series 1003 rakes
- The rotors have different diameters (Ø1300 mm, Ø1500 mm, Ø1800 mm) to adapt to different crops
- DIGIDRIVE ensures reliable, maintenance-free transmission
- Working angle can be quickly adjusted without tools
- Integrated suspension provides comfort and stability in transport
- Deflectors prevent claws from curling up and getting lost
- Worn models have a centre of gravity close to the tractor for easy and safe handling
Find out more
KUHN GF 102 Series KUHN GF 102 series rakes
- Models suitable for small and medium-sized farms
- 15 x 6.00-6 balloon wheels, positioned close to the working area for efficient tracking
- 4 claw teeth for flexibility and durability
- Optional long feed guards available
- Compact transport thanks to foldable outer rotors
- Quick and tool-free bevel adjustment by swivelling the wheels
- Digidrive transmission and robust tractor head with automatic re-centring
Find out more